人肌の感触で建築

どのような感触が欲しいかを考えて、決めれば、それに適応した機能や空間ができるかもしれないとして、感触を考えてみる。

先に出した例は、ふわふわ。

今制作中の輪島塗のフリーカップは人肌の感触を出そうとして、漆塗を石目乾漆で人肌の感触に近づけようと職人の方にお願いして、見本塗を制作中である。

だから、今一番興味がある感触は人肌なので、これを建築でも実現できるといい。

乾漆とは、乾いた粉状の漆を漆塗の上に振り掛けて仕上げる技法で、ちょっとざらついた感触になるが、石目乾漆はさらに、たぶん、乾いた粉状の漆の振り掛ける量をもっと増やして、不均一にし、さらに乾いた粉状の漆が載ったところを平らに均していく。そうすると、乾いた粉状の漆が載った所が島状になり、載っていない所が筋状になり、ちょうど肌の表面を拡大して見た時と同じような仕上げになる。これで石目乾漆の表面を触ると人肌の感触になるはずだろうという憶測で、今、見本を制作中。

ただ、石目乾漆の仕上げは、建築で言えば、吹付けタイルの仕上げに似ているような気がするし、もっと言えば、コンクリートに細かく砕いた大理石などを混ぜて、不均一に吹付けて、コテで均せば、できそうな気がするし、さらに、もっと言えば、コンクリート打放しの表面の仕上げを、型枠の仕上げ面を工夫するのか、型枠を脱型した後に手を加えるのかはわからないが、人肌の感触にすることももしかしたら可能かもしれない。そうしたら、構造体として使えるから、人肌の感触だけで建築ができるかもしれない。ただし、コンクリート打放しの表面の仕上げの技法を新たに考える必要はあるだろうが。

8FA037BE-67EE-404A-82AE-0CDA708CF736.jpeg

"Building on the feel of human skin"

Consider what kind of feeling you want, decide, if you decide, you may think that the function or space adapted to it may be made and think about the feel.

The example given earlier is fluffy.

A free cup of Wajima coat under construction now is preparing a sample painting, asking the craftsman to bring the lacquer coat closer to the human skin feeling with the stone eye lacquer, in order to bring out the human skin feeling.

So, the most interesting feeling now is human skin, so we hope that this can be realized even in architecture.

Dry lacquer is a technique that finishes dry lacquer lacquer on the lacquer finish, giving a slight gritty feel, but the stone eye lacquer is probably more dry, powdery lacquer sprinkled over more Increase it, make it nonuniform, and flatten the place where dried powdery lacquer was put on. Then, the place where dried powdery lacquer is placed becomes island-like, the place where it is not placed becomes streaky, just like looking at the surface of the skin enlarged. It is speculation now that touching the surface of the stone eye dry lacquer should be a feeling of human skin, I am producing a sample now.

However, the finish of the stone eye lacquer is like the finishing of the spray tile if it says in the construction, more speaking, mixing the finely crushed marble etc. in concrete, spraying non-uniformly Then, if you do it with the iron, you will feel like it will be possible, and more to say, whether finishing the surface of the concrete release is to devise the finished surface of the formwork or after removing the mold I do not know, but maybe it is possible to feel human skin. If you do, you can use it as a structure, so you may be able to build with only the feel of human skin. However, although it will be necessary to newly consider the technique of finishing the concrete release surface.

PageTop