毎回変える
つくるためにあれこれ考えていると、必ず不確定なことにぶつかる。いつも同じことの繰り返しやいつも同じ人やいつものやり方の中にいればそのようなことは無いだろうが、必ず毎回新しい要素を入れるので、時には何十年も使い慣れた道具としてのCADを全く未知のものに変える時もあるので、定量的に作業が進まないこともある。
ただ、新しい要素を毎回入れていかいないと、過去に上手くいったやり方や思考を無意識に繰り返してしまい、そうすると、本来は毎回起こることが違うはずなのに、それに向き合わずに過去のやり方に固執して無理矢理当てはめるようなことをしてしまい、結果的にどこかに歪みが出る、大概は自分の中に歪みが出る。
だから、毎回真っ新に向き合い、その時最善の手段を取ろうとするから毎回変える。先日、10年以上ご無沙汰していた方と一緒に仕事をしたいと思い、その方に直接連絡した。久しぶりに声を聞いて時の経過を感じたが、かっちりと今回のプロジェクトにはまるような気がした。
"Change every time"
When I think about it to make it, I always run into uncertainties. It wouldn't happen if you were always repeating the same thing, always in the same person, or in the usual way, but because you always add new elements, sometimes CAD as a tool you've been used to for decades is completely unknown. Since there are times when it is changed to something else, the work may not proceed quantitatively.
However, if you do not add new elements every time, you will unknowingly repeat the methods and thoughts that worked well in the past, and if you do so, what will happen each time will be different, but instead of facing it, stick to the past methods I do something that I force myself to apply, and as a result, there is some distortion, usually in myself.
That's why I face new things every time and try to take the best measures at that time, so I change every time. The other day, I wanted to work with a person who had been absent for more than 10 years, so I contacted him directly. When I heard the voice for the first time in a long time, I felt the passage of time, but I felt like I was completely absorbed in this project.
