取っ手

合わせるのか、へり下るのか、主張するのか、意外と判断が難しい、相手が何かにもよるから、一概には言えないが、当たり前の回答だろう。

これはデザインの話。注文していたコーヒーカップが届いた。出来合いの輪島塗のコーヒーカップを以前購入したのだが、使い勝手がよかったので、もう1客注文したら在庫切れで、新たなに製作をするというので、ならば、今の黒と朱色の組み合わせを反転して欲しいとお願いしていたもの。

コーヒーカップだが、同型で湯呑もあり、取っ手があるか無いかだけの違い、まず湯呑をつくり、その後に取っ手をつけコーヒーカップにしたのだろう。

元があって、そこに付け足す、建築で言えば、増築みたいなものか。新たに注文していたカップは色違い、だから取っ手は同じ形状のはずが、届いたカップは違う、取っ手の形状が違っていた、付け足すものが変わっていた。

もしはじめからコーヒーカップをデザインするならば、当然、取っ手だけを後から付け足すようなことはしない。取っ手を含めて全体でどうデザインをするのかと考える。ただ、コーヒーカップをデザインすることを想像してみると、取っ手は厄介な存在、無い方がデザインとしては完成度が高くなるような気がする、それか片方だけではなく、両側に付けるか、それもおかしいが、スープカップになってしまうが、非対称の形は良いのだが、取っ手の存在感が大きいので、取っ手の形状が全体のデザインに与える影響が大きい。

それで取っ手を意識しすぎると、カップ全体のデザインがおかしくなる。今までコーヒーカップを見て綺麗なデザインだなと思ったことがほとんどなく、取っ手が無い方がよいのに、取っ手の形状がな、と思うことが多い。それだけコーヒーカップのデザインは難しいのだろう。

毎朝コーヒーを飲むので、コーヒーカップをいくつか所有しているが、無い、無いに等しい、いいデザインのものが、だから、つくりたくなる。

F0B824A9-DE9D-4A1A-A929-2E8F6D6AA581.jpeg

"Handle"

It's hard to judge whether to match, hail down, or argue. The answer depends on what the other party is.

This is a story about design. I received the coffee cup I had ordered. I bought a freshly made Wajima-painted coffee cup in the past, but it was easy to use, so if I ordered another customer, it would be out of stock and a new one would be made. What I had asked for.

It was a coffee cup, but it was the same type and had a tea cup. The only difference was whether or not there was a handle.

Is there something like an extension in terms of architecture? The newly ordered cups were different in color, so the handle should have the same shape, but the cup that arrived was different, the shape of the handle was different, and the additions had changed.

If you're designing a coffee cup from the beginning, of course, don't just add the handle later. Think about how to design the entire design including the handle. However, if you imagine designing a coffee cup, the handle is a nuisance, and if you don't have the feeling that it will be more complete as a design, you can attach it to both sides, Although it is strange, it becomes a soup cup, but the asymmetric shape is good, but the presence of the handle is large, so the shape of the handle has a great influence on the overall design.

So if you are too conscious of the handle, the whole cup design will go wrong. I have never thought that it was a beautiful design by looking at a coffee cup until now, and I often think that the shape of the handle is good, even though it is better not to have a handle. That's how difficult it is to design a coffee cup.

I drink coffee every morning, so I have a few coffee cups, but none, no, good design, so I want to make one.