偏りをデザインする

カップに入れた液体もデザインの一部とした輪島塗のフリーカップの発想はとても気に入っていた。

漆塗のカップは下地が木なので、他のガラスや陶磁器などでできたカップより、断熱性があり、熱を通しにくいので、熱い液体を入れても、カップ自体が熱くて手で持てなくなるようなことはない。

だから、液体の入ったフリーカップを手に持ち、飲み口を唇に当て、感触を楽しみながら、液体を口の中に注ぐ、という一連のことが液体の温度に関係なく無理なくできたので、液体もカップのデザインの一部として取り込んでも成立した。これは漆塗の器ならではのことなので、漆器でしか通用しないデザインに至ったことも気に入っていた。

問題は絞り方。飲み口の直径85mmから手で持つ部分までどうやって絞り込むか。ここで最終的に目指す形を言葉で書き出しておいたので、そこに立ち返る。

「飲み口の厚みを変えることにより、カップが唇に当たる時の感触が変わるので、その日の気分しだいで、飲み口を変えることができ、飲み口を変えることにより、カップの見え方も変わり、その日の気分しだいでカップの佇まいも変わる形」

飲み口を変えることによって、カップの見え方を変えるには、見る角度によってカップの形が違うということ。すなわち、それはカップ自体が非対称の形をしていなければならない。非対称の形にして、果たして木地をつくることができるのか、輪島の木地屋さんで対応してくれるのか、という問題もあるかもしれないが、まずはカップの見え方を見る角度によって変わるように、非対称になるように絞り方を考えてみる。

ところで、飲み口の厚みを変えるということは、カップの重心が中心ではなくなる、ということ。重さのバランスが偏るということ。

カップのデザインを考えはじめた時、重さもデザインしてみようかと考えていた。漆器は下地が木だから、とても軽い。その軽さが漆器の良さのひとつでもあるが、漆器にもう少し重量があったら、例えば、堅くて重い木材を使用して、木地をつくったとしたら、漆器自体に違う魅力を与えることができるのではないかと考えた。

いつしかその考えは消えていったが、重さのバランスが偏る、ということをデザインに取り入れることはできないか、それと非対称にする飲み口から手で持つ部分までの絞り方、非対称もある意味偏るということだから、をうまく関連づけることはできないか、そうすれば一番悩んでいた手で持つ部分までの絞り方が解決するのではないかという予感めいたところへ、輪島の塗師の所に行く前夜にやっと辿り着いた。

IMG_0578.JPG

"Design biases"

I liked the idea of ​​the Wajima-coated free cup which made the liquid put in the cup a part of the design very much.

Since the base of the lacquered lacquer is wood, it is more heat-insulating than a cup made of other glass, ceramics, etc. It is difficult to pass heat, so even if hot liquid is put, the cup itself is hot and it can not be held by hand There is nothing.

So it was easy to hold a free cup with liquid in your hand, put a drinking mouth on your lips, pour a liquid into your mouth while enjoying the feeling, irrespective of the temperature of the liquid, Even if liquid was also incorporated as part of the design of the cup, it was established. Because this is unique to lacquer-covered vessels, I also liked the design that I only got lacquer ware.

The problem is how to narrow down. How to narrow down from the 85 mm diameter of the drinking mouth to the part with the hand. I wrote out the final target shape here in words, so I will return there.

"By changing the thickness of the drinking mouth, the feeling when the cup hits the lips changes, so depending on the mood of the day, you can change the drinking mouth, by changing the drinking mouth, the way the cup looks changes, that day The appearance of the cup changes according to the mood of the cup "

To change the appearance of the cup by changing the drinking mouth, the shape of the cup is different depending on the viewing angle. That is, the cup itself must be asymmetrical in shape. There may be a problem of whether it can be made asymmetrically and whether it is possible to create a woodland or whether it will correspond with a wooden store of Wajima, but first, as it changes depending on the angle at which the appearance of the cup looks, it is asymmetric Think about how to narrow down so that it becomes.

By the way, changing the thickness of the drinking mouth means that the center of gravity of the cup is not the center. The balance of weight is biased.

When I started thinking about the design of the cup, I was thinking about designing the weight. Lacquer ware is very light, as the base is wood. Its lightness is also one of the merits of lacquer ware, but if the lacquer ware has a little more weight, for example, if you use hard and heavy wood to make a woodland, you can give the lacquerware itself different charm I thought that.

Somewhat disappeared that thought, we can not incorporate the fact that the balance of weight is biased into the design, how to narrow asymmetric part from the drink mouth to asymmetrical part, asymmetry is also biased in some meaning So, can you relate it well, and then to the place I felt beforehand that I could solve how to squeeze the part with the most troubled hands, on the eve of going to Wajima's painter Finally I arrived.